控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。
ꁆ
ꁇ
| Module Model | ESP-01 |
| Package | DIP-8 |
| Size | 24.7*14.4*11.0(±0.2)mm |
| SPI Flash | Default 8Mbit |
| Interface | UART/GPIO |
| 1O Pod | 2 |
| UART Baudrate | Support 300～4608000 bps,Default 115200 bp |
| Frequency Range | 2412～2484MHz |
| Antenna | PCB antenna,2 dBi |
| Secondary Development | Support |
| Transmit Power | 802.11b:16±2 dBm(@11Mbps) 802.11g:14±2 dBm(@54Mbps) 802.11n:13±2 dBm(@HT20,MCS7) |
| Receiving Sensitivity | CCK,1 Mbps:-90dBm CCK,11 Mbps:-85dBm 6 Mbps(1/2 BPSK):-88dBm 54 Mbps (3/464-QAM):-70dBm HT20,MCS7(65 Mbps,72.2 Mbps):-67dBm |
| Power (Typical Values) | Continuous Transmission =>Average:~71mA,Peak:300mA Modem Sleep:~20mA Light Sleep:~2mA Deep Sleep:~0.02mA |
|
Security |
WEP/WPA-PSK/WPA2-PSK |
| Power Supply | Voltage 3.0V~3.6V,Current>500mA |
| Operating Temperature | -20 ℃～85 ℃ |
| Storage Environment | 40 ℃～90 ℃,<90%RH |
| Weight |
0.65g |
Resources
Various AT firmware Development tools
